ZyXEL Communications P-2802H(W)(L)-I Series - Manual (Page 246)

Chapter 17 Quality of Service (QoS)
P-2802H(W)(L)-I Series User’s Guide
246
17.3.2 QoS Example
In the following figure, your Internet connection has an upstream transmission speed of 50
Mbps. You configure a classifier to assign the highest priority queue (6) to VoIP traffic from
the LAN interface, so that voice traffic would not get delayed when there is network
congestion. Traffic from the boss’s IP address (192.168.1.23 for example) is mapped to queue
5. Taffic that does not match these two classes are assigned priority queue based on the
internal QoS mapping table on the ZyXEL Device.
Figure 139 QoS Example
Figure 140 QoS Class Example: VoIP -1
Ethernet Priority Select this option and select a priority level (between 0 and 7) from the drop
down list box.
"0" is the lowest priority level and "7" is the highest.
VLAN ID Select this option and specify a VLAN ID number between 2 and 4094.
Back Click Back to go to the previous screen.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.
Table 102 QoS Class Configuration (continued)
LABEL DESCRIPTION
Internet
50 Mbps
VDSL
VoIP: Queue 6
Boss: Queue 5
IP=192.168.1.23