ZyXEL Communications P-2802H(W)(L)-I Series - Manual (Page 143)

Chapter 10 Voice
P-2802H(W)(L)-I Series User’s Guide
143
10.9 Advanced Analog Phone Setup Screen
Use this screen to edit advanced settings for each phone port. To access this screen, click
Advanced Setup in VoIP > Phone > Analog Phone.
Figure 79 Phone > Analog Phone > Advanced
Each field is described in the following table.
PSTN Line (“L”
models only)
Select this if you want to receive phone calls from the PSTN line (that do not use
the Internet) on this phone port. If you select more than one source for incoming
calls, there is no way to distinguish between them when you receive phone calls.
Note: When the ZyXEL Device does not have power, regardless of
the settings you configure, the phone(s) connected to the
PHONE port(s) can still be used for making PSTN calls. Only
one phone can be in use at a time.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Cancel Click this to set every field in this screen to its last-saved value.
Advanced Setup Click this to edit the advanced settings for this phone port. The Advanced Analog
Phone Setup screen appears.
Table 51 Phone > Analog Phone
LABEL DESCRIPTION
Table 52 Phone > Analog Phone > Advanced
LABEL DESCRIPTION
Analog Phone This field displays the analog phone port you see in this screen.
Voice Volume
Control
Speaking Volume Enter the loudness that the ZyXEL Device uses for speech that it sends to the
peer device.
-1 is the quietest, and 1 is the loudest.