ZyXEL Communications P-2802H(W)(L)-I Series - Manual (Page 113)

Chapter 8 Wireless LAN
P-2802H(W)(L)-I Series User’s Guide
113
Figure 57 OTIST: Settings
You can use the key in this screen to set up WPA-PSK encryption manually for non-OTIST
devices in the wireless network.
Review the settings, and click OK. The ZyXEL Device begins transferring OTIST settings.
The following screens appear in the ZyXEL Device and in the wireless devices.
Figure 58 OTIST: In Progress on the ZyXEL Device
Figure 59 OTIST: In Progress on the Wireless Device
These screens close when the transfer is complete.
8.5.1 Notes on OTIST
1 If you enable OTIST in a wireless device, you see this screen each time you start the
utility. Click Yes to search for an OTIST-enabled AP (in other words, the ZyXEL
Device).
Figure 60 Start OTIST?