ZyXEL Communications P-2802H(W)(L)-I Series - Manual (Page 106)

Chapter 8 Wireless LAN
P-2802H(W)(L)-I Series User’s Guide
106
"
If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.
Figure 50 Wireless: No Security
The following table describes the labels in this screen.
8.4.2 WEP Encryption Screen
In order to configure and enable WEP encryption; click Network > Wireless LAN to display
the General screen. Select Static WEP from the Security Mode list.
Table 31 Wireless No Security
LABEL DESCRIPTION
Security Mode Choose No Security from the drop-down list box.