1 system maintenance, Enter 1 to open menu 24.1 – system status – ZyXEL Communications VES-1000 User Manual
Page 72
VES-1000 Series Ethernet Switch
9-2
System Maintenance 1
9.2.1 System
Maintenance
Step 1.
Enter 24 from the main menu to go to Menu 24 – System Maintenance.
Step 2.
Enter 1 to open Menu 24.1 – System Status.
Step 3.
Enter 1 again to open Menu 24.1.1 — System Maintenance — System Status.
Figure 9-3 Menu 24.1 – System Maintenance – System Status
Figure 9-3 shows the menu screen for the VES-1012 Ethernet switch. The same screen for the VES-1008 will
show Ports 1-10
The following table describes the fields present in Menu 24.1 – System Maintenance – Status.
Table 9-A System Maintenance – Status Menu Fields
FIELD DESCRIPTION
Port
This refers to the VDSL or Ethernet port number. The cursor (“>“) next to a port marks the
current selected port (see commands ahead).
Link
This field shows whether the VDSL or Ethernet connection is down, the
upstream/downstream speeds of the VDSL connections and the speed/duplex mode of the
Ethernet connections.
State
This field shows training state of the ports. The states are FWD (forwarding), which means
the link is functioning normally or STOP (the port is stopped to break a loop or duplicate
path).
TxPkts
This field shows the number of transmitted packets on this port.
RxPkts
This field shows the number of received packets on this port.
Errs
This field shows the number of received errors on this port.
Tx KB/s
This field shows the number of bytes transmitted on a per-second basis in kilobytes per
second on this port.
Rx KB/s
This field shows the number of bytes received on a per-second basis in kilobytes per second
on this port.
Menu 24.1 — System Maintenance — System Status
Port Link
State
TxPkts RxPkts Errs Tx(KB/s) Rx(KB/s) Up
Time
> 1
18M/16M
FWD
1636800
636352
4
473
10
7:46:10
2
18M/16M
FWD
3023504
0
0
8
0
22:24:04
3
Down
STOP
0
0
0
0
0
0:00:00
4
18M/16M
FWD
3093495
55529
0
8
0
22:24:04
5
Down
STOP
0
0
0
0
0
0:00:00
6
Down
STOP
0
0
0
0
0
0:00:00
7
18M/16M
FWD
3036539
26460
0
8
0
22:23:51
8
18M/16M
FWD
3041121
16886
0
8
0
22:24:00
9
18M/16M
FWD
3017116
0
0
8
0
22:24:03
10
18M/16M
FWD
109882
0
0
8
0
0:55:56
11
12M/16M
FWD
3029325
11669
0
6
0
22:24:02
12
18M/16M
FWD
607588
30
0
6
0
5:20:06
13
100M/F
FWD
1051300 10710950
1
11
508
72:07:19
14
100M/F
FWD
246459
9990813
0
0
10
72:07:19
Press Command:
COMMANDS: a-Reset All b-Reset d-Drop i-UP j-Down p-Detail ESC-Exit