ZyXEL Communications VES-1000 - Manual (Page 130)

VES-1000 Series Ethernet Switch
13-10 Switch-Related Commands
13.5.1 MAC Learning Status
sw mac status
This command displays ports that may learn MAC addresses.
Figure 13-12 MAC Learning Status
From this screen we see that all ports have MAC learning enabled by default.
For actual MAC address learning to occur on a port, Active must be set to Yes in Menu 6 — Ports
Setup for that port.
13.6 MAC Address Learning
To disallow port 1 from learning MAC addresses use this command.
sw mac learn 1 off This command turns MAC address learning off for port 1.
sw mac status Type this command to see the result.
Figure 13-13 Set Port 1 To Learn MAC Addresses
VES_APLHA> sw mac status
Port 1 MAC learning operation : Enabled
Port 2 MAC learning operation : Enabled
Port 3 MAC learning operation : Enabled
Port 4 MAC learning operation : Enabled
Port 5 MAC learning operation : Enabled
Port 6 MAC learning operation : Enabled
Port 7 MAC learning operation : Enabled
Port 8 MAC learning operation : Enabled
Port 9 MAC learning operation : Enabled
Port 10 MAC learning operation : Enabled
Port 11 MAC learning operation : Enabled
Port 12 MAC learning operation : Enabled
Port 13 MAC learning operation : Enabled
Port 14 MAC learning operation : Enabled
CAUTION: For actual MAC address learning to occur on a port, Active must be
set to Yes in Menu 6 - Ports Setup for that port.
VES_APLHA>
VES_APLHA> sw mac status
Port 1 MAC learning operation : Disabled
Port 2 MAC learning operation : Enabled
Port 3 MAC learning operation : Enabled
Port 4 MAC learning operation : Enabled
Port 5 MAC learning operation : Enabled
Port 6 MAC learning operation : Enabled
Port 7 MAC learning operation : Enabled
Port 8 MAC learning operation : Enabled
Port 9 MAC learning operation : Enabled
Port 10 MAC learning operation : Enabled
Port 11 MAC learning operation : Enabled
Port 12 MAC learning operation : Enabled
Port 13 MAC learning operation : Enabled
Port 14 MAC learning operation : Enabled
CAUTION: For actual MAC address learning to occur on a port, Active must be
set to Yes in Menu 6 - Ports Setup for that port.
VES_APLHA>