ZyXEL Communications VES-1000 - Manual (Page 34)

VES-1000 Series Ethernet Switch
3-2 Introducing the SMT
Table 3-A Navigating the SMT
OPERATION KEYSTROKE DESCRIPTION
Move down to
another menu [ENTER] To move forward to a submenu, type in the number of the desired
submenu and press [ENTER].
Move up to a
previous menu [ESC] Press [ESC] to move back to the previous menu.
Move to a “hidden”
menu Press [SPACE BAR]
to change No to Yes
then press [ENTER]. Fields beginning with “Edit” lead to hidden menus and have a default
setting of No. Press [SPACE BAR] once to change No to Yes, then
press [ENTER] to go to the “hidden” menu.
Move the cursor [ENTER] or
[UP]/[DOWN] arrow
keys. Within a menu, press [ENTER] to move to the next field. You can also
use the [UP]/[DOWN] arrow keys to move to the previous and the next
field, respectively.
Entering information Type in or press
[SPACE BAR], then
press [ENTER].
You need to fill in two types of fields. The first requires you to type in
the appropriate information. The second allows you to cycle through
the available choices by pressing [SPACE BAR].
Required fields < ? > All fields with the symbol must be filled in order to be able to save
the new configuration.
N/A fields Some of the fields in the SMT will show a . This symbol refers to
an option that is Not Applicable.
Save your
configuration [ENTER] Save your configuration by pressing [ENTER] at the message “Press
ENTER to confirm or ESC to cancel”. Saving the data on the screen
will take you, in most cases to the previous menu.
Exit the SMT Type 99, then press
[ENTER]. Type 99 at the main menu prompt and press [ENTER] to exit the SMT
interface.
3.3 SMT Menus At A Glance
The following figure gives an overall view of how the SMT menus are organized.