ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 58)

ES-2108 Series User’s Guide
58 Chapter 4 The Web Configurator
4 Type atlc after the “ Enter Debug Mode ” message.
5 Wait for the “ Starting XMODEM upload ” message before activating XMODEM
upload on your terminal.
6 After the factory-default configuration file upload, type atgo to restart the switch.
Figure 21 Resetting the Switch: Via the Console Port
The switch is now re initialized with the factory-default configuration file including the
default password of “1234”.
4.7 Logging Out of the Web Configurator
Click Logout in a screen to exit the web configurator. You have to log in with your password
again after you log out. This is recommended after you finish a management session both for
security reasons and so as you don’t lock out other switch administrators.
Figure 22 Web Configurator: Logout Screen
4.8 Help
The web configurator’s online help has descriptions of individual screens and some
supplementary information.
Click the Help link from a web configurator screen to view an online help description of that
screen.
Bootbase Version: V1.01 | 01/05/2006 09:19:25
RAM: Size = 32768 Kbytes
DRAM POST: Testing: 32768K OK
FLASH: AMD 32M *1
ZyNOS Version: V3.70(ABS.0)b0 | 05/10/2006 18:35:35
Press any key to enter debug mode within 3 seconds.
..............................
Enter Debug Mode
ras> atlc
Starting XMODEM upload (CRC mode)....
CCCCCCCCCCCCCCCC
Total 262144 bytes received.
Erasing..
................................................................
OK
ras> atgo