6 mvr commands, Table 77 mvr commands – ZyXEL Communications ZyXEL Dimension ES-2108 User Manual
Page 210
ES-2108 Series User’s Guide
210
Chapter 30 Introducing Commands
30.11.6 mvr Commands
The following table lists the
mvr
commands in configuration mode.
default-
management
dhcp-bootp
release
Releases the dynamic in-band IP
address.
13
default-
management
dhcp-bootp
renew
Updates the dynamic in-band IP address. 13
default-
management
Sets a static in-band IP address and
subnet mask.
13
manageable
Sets the management IP address and
subnet mask of the switch in the
specified VLAN.
13
Sets the IP address and subnet mask of
the switch in the specified VLAN.
13
default-
gateway address> Sets a default gateway IP address for this VLAN. 13 Table 76 Command Summary: config-vlan Commands (continued) COMMAND DESCRIPTION PRIVILEGE Table 77 mvr Commands COMMAND DESCRIPTION PRIVILEGE mvr <1- 4094> Enters the MVR (Multicast VLAN Registration) configuration mode. 13 source-port Sets the source port(s). receive multicast traffic in a multicast VLAN. 13 receiver-port Sets the receiver port(s). multicast traffic in a multicast VLAN. 13 inactive Disables MVR settings. 13 mode ble> Sets the MVR mode ( dynamic or compatible ). 13 name Sets the MVR name for identification purposes. 13 tagged list> Sets the port(s) to tag VLAN tags. 13
An MVR source port can send and
An MVR receiver port can only receive