ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 232)

ES-2108 Series User’s Guide
232 Chapter 33 Interface Commands
where
An example is shown next.
• Enable port one for configuration.
• Enable broadcast control.
• Set how many broadband packets the interface receives per second.
33.2.3 bandwidth-limit
The bandwidth-limit command enables bandwidth control on the switch.
Syntax:
bandwidth-limit
bandwidth-limit ingress
bandwidth-limit ingress
bandwidth-limit egress
bandwidth-limit egress
where
An example is shown next.
• Enable port one for configuration.
• Enable bandwidth limits for outgoing traffic on port 1.
bmstorm-
limit = Enables broadcast/multicast storm control limit on the switch.
= Limits how much broadcast/multicast traffic the interface receives in
kilobytes per second.
sysname(config)# interface port-channel 1
sysname(config-interface)# bmstorm-limit
sysname(config-interface)# bmstorm-limit 64
ingress = Activates bandwidth limits for incoming traffic (ingress) on the
port.
ingress = Sets the maximum bandwidth allowed for incoming traffic
(ingress) on the port.
egress = Activates bandwidth limits for outgoing traffic (egress) on the
port.
egress = Sets the maximum bandwidth allowed for outgoing traffic
(egress) on the port.