ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 208)

ES-2108 Series User’s Guide
208 Chapter 30 Introducing Commands
speed-duplex
half|10-
full|100-
half|100-
full|1000-
full>
Sets the duplex mode ( half or full )
and speed ( 10 , 100 or 1000 Mbps) of
the connection on the interface. Selecting
auto (auto-negotiation) makes one port
able to negotiate with a peer
automatically to obtain the connection
speed and duplex mode that both ends
support.
13
no egress set Disables the outgoing traffic port list for a
port-based VLAN.
13
igmp-
immediate-
leave
Disables IGMP immediate leave on the
port.
13
igmp-
filtering
profile
Disables IGMP filtering on the port. 13
igmp-group-
limited
Disables IGMP group limitation. 13
gvrp Disable GVRP on the port(s). 13
flow-control Disables flow control on the port(s). 13
vlan-trunking Disables VLAN trunking on the port(s). 13
mirror Disables port mirroring on the port(s). 13
diffserv Disables DiffServ on the switch. 13
bandwidth-
limit
Disables bandwidth limit on the port(s). 13
bmstorm-limit Disables broadcast storm limits on the
switch.
13
inactive Enables the port(s) on the switch. 13
intrusion-
lock
Disables intrusion-lock on a port so that a
port can be connected again after you
disconnected the cable.
13
inactive Disables the specified port(s) on the
switch.
13
help Displays a description of the interface
port-channel commands.
13
exit Exits from the interface port-channel
command mode.
13
intrusion-lock Enables intrusion lock on a port and a
port cannot be connected again after you
disconnected the cable.
13
test Performs an interface loopback test. 13
Table 75 interface port-channel Commands (continued)
COMMAND DESCRIPTION PRIVILEGE