ZyXEL Communications ZyXEL Dimension ES-2108 User Manual
Page 204
ES-2108 Series User’s Guide
204
Chapter 30 Introducing Commands
timesync
p> Sets the time server protocol. 13 server Sets the IP address of your time server. 13 loginPrecede nce LocalRADIUS | RADIUSOnly> Select which database the switch should use (first) to authenticate a user. 14 queue priority <0-7> level <0-3> Sets the priority level-to- physical queue mapping. 13 storm- control Enables broadcast storm control on the switch. 13 bandwidth- control Enables bandwidth control. 13 mac-aging- time <10-3000> Sets learned MAC aging time. 13 snmp-server get-community Sets the get community. 13 set-community Sets the set community. 13 trap-community Sets the trap community. 13 trap-destination Sets the IP addresses of up to four stations to send your SNMP traps to. 13 [contact contact>] [location location>] Sets the geographic location and the name of the person in charge of this switch. 13 logins username password Configures a default (read- only) account. 14 username privilege <0- 14> Assigns a privilege level to user accounts. 14 service- control icmp Allows ICMP access for services such as Ping. 13 snmp Allows SNMP management. 13 http number> Allows HTTP access on the specified service port and defines the timeout period. 13 telnet number> Allows Telnet access on the specified service port. 13 ftp number> Allows FTP access on the specified service port. 13 Table 74 Command Summary: Configuration Mode (continued) COMMAND DESCRIPTION PRIVILEG
E