ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 191)

ES-2108 Series User’s Guide
Chapter 30 Introducing Commands 191
30.11.2 Enable Mode
The following table describes the commands available for Enable mode.
[vlan
]
[size <0-1472>]
[-t]
Sends Ping request to an Ethernet device in the
specified VLAN(s) with the specified parameters.
0
help Displays command help information. 0
traceroute Determines the path a packet takes to a device. 0
[vlan ]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a device in
a VLAN.
0
help Displays command help information. 0
ssh <1|2> <[user@]dest-ip> Connects to an SSH server with the specified
SSH version.
0
Table 72 Command Summary: User Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 73 Command Summary: Enable Mode
COMMAND DESCRIPTION LEVEL
help Displays help information. 13
logout Exits Enable (or privileged) mode. 13
exit Exits Enable (or privileged) mode. 13
history Displays a list of command(s) that
you have previously executed.
13
enable Accesses Enable (or privileged)
mode.
13
disable Exits Enable (or privileged) mode. 13
configure Accesses Configuration mode.
See Section 30.11.3 on page 196 .
13
no logging Clears system logs. 13
arp Flushes the ARP (Address
Resolution Protocol) table.
13
interface
number>
Clears the interface status of the
specified port(s).
13
show ip Displays IP related information. 13
arp Displays the ARP table. 13
tcp Displays TCP related information. 13
udp Displays UDP related information. 13
route Displays IP routing information. 13