ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 245)

ES-2108 Series User’s Guide
Chapter 34 IEEE 802.1Q Tagged VLAN Commands 245
34.5 Disable VLAN
Syntax:
vlan inactive
This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.
34.6 Show VLAN Setting
Syntax:
show vlan
This command shows the IEEE 802.1Q Tagged SVLAN (Static VLAN) table.
An example is shown next.
• VID is the VLAN identification number.
• Status shows whether the VLAN is static or active.
• Elap-Time is the time since the VLAN was created on the switch.
• The
TagCtl section of the last column shows which ports are tagged and which are
untagged.
sysname# show vlan
The Number of VLAN: 3
Idx. VID Status Elap-Time TagCtl
---- ---- -------- ------------ ------------------------
1 1 Static 0:12:13 Untagged :1-5
Tagged :
1 100 Static 0:00:17 Untagged :
Tagged :1-4
1 200 Static 0:00:07 Untagged :1-2
Tagged :3-8