ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 194)

ES-2108 Series User’s Guide
194 Chapter 30 Introducing Commands
timeout Displays the HTTPS session
timeout.
13
multi-login Displays multi-login information 13
plt Displays Packet Loop Test (PLT). 13
mac-aging-time Displays MAC learning aging
time.
13
cluster Displays cluster management
status.
13
candidates Displays cluster candidate
information.
13
member Displays the MAC address of the
cluster member(s).
13
member mac Displays the status of the cluster
member(s).
13
members config Displays the configuration of the
cluster member(s).
13
igmp-filtering
profile
Displays IGMP filter profile
settings.
13
igmp-snooping Displays IGMP snooping settings. 13
multicast Displays multicast settings. 13
mvr DIsplays all MVR (Multicast VLAN
Registration) settings.
13
DIsplays specified MVR
information.
13
diffserv Displays DiffServ settings on the
switch.
13
pwr Displays PoE (Power over
Ethernet settings on the switch).
Only available on the ES-
2108PWR model).
13
igmp-flush Removes all IGMP information. 13
kick tcp Resets a TCP connection. Use
the show ip tcp command to
get the Session ID.
13
mac-flush Clears the MAC address table. 13
Removes all learned MAC
address on the specified port(s).
13
erase running-config Resets to the factory default
settings.
13
interface port-
channel
list>
[bandwidth-
limit...]
Resets to the factory default
settings on a per port basis and
optionally on a per feature
configuration basis.
13
Table 73 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION LEVEL