ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 196)

ES-2108 Series User’s Guide
196 Chapter 30 Introducing Commands
30.11.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
traceroute
[in-band|out-of-
band|vlan
id>][ttl <1-
255>] [wait <1-
60>] [queries
<1-10>]
Determines the path a packet
takes to a device.
13
help Displays command help
information.
13
ssh <1|2>
<[user@]dest-ip>
Connects to an SSH server with
the specified SSH version.
13
[command ] Connects to an SSH server with
the specified SSH version and
addition commands to be
executed on the server.
13
Table 73 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION LEVEL
Table 74 Command Summary: Configuration Mode
COMMAND DESCRIPTION
PRIVILEG
E
help Displays help information. 13
logout Exits from the CLI. 13
history Displays a list of previous
command(s) that you have
executed.
13
exit Exits from Config mode into
Enable mode.
13
mode zynos Changes the CLI mode to the
ZyNOS format.
13
password Change the password for
accessing Enable mode.
14
no ip Sets the management IP
address to the default value.
13
route Removes a specified IP static
route.
13
route
inactive
Enables a specified IP static
route.
13
igmp-filtering Clears the IGMP filtering
settings on the switch.
13
profile Deletes the IGMP filtering
profile.
13