ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 233)

ES-2108 Series User’s Guide
Chapter 33 Interface Commands 233
• Set the outgoing traffic bandwidth limit to 5000Kbps..
33.2.4 mirror
The mirror command enables port mirroring on the interface.
Syntax:
mirror
mirror dir
where
An example is shown next.
• Enable port mirroring.
• Enable the monitor port 3.
• Enable ports 1, 4, 5 and 6 for configuration.
• Enable port mirroring on the ports.
• Enable port mirroring for outgoing traffic. Traffic is copied from ports 1, 4, 5 and 6 to
port three in order to examine it in more detail without interfering with the traffic flow on
the original ports.
33.2.5 gvrp
Syntax:
gvrp
sysname(config)# interface port-channel 1
sysname(config-interface)# bandwidth-limit egress
sysname(config-interface)# bandwidth-limit egress 5000
dir
= Enables port mirroring for incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from one or all ports to another
or all ports for external analysis.
sysname(config)# mirror-port
sysname(config)# mirror-port 3
sysname(config)# interface port-channel 1,4-6
sysname(config-interface)# mirror
sysname(config-interface)# mirror dir egress