ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 213)

ES-2108 Series User’s Guide
Chapter 31 User and Enable Mode Commands 213
C
H A P T E R
31
User and Enable Mode
Commands
This chapter describes some commands which you can perform in the User and Enable modes.
31.1 Overview
The following command examples show how you can use User and Enable modes to diagnose
and manage your switch.
31.2 show Commands
These are the commonly used show commands.
31.2.1 show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and
system up time).
An example is shown next.
sysname# show system-information
System Name : ES-2108-G
System Contact :
System Location :
Ethernet Address : 00:13:49:00:00:01
ZyNOS F/W Version : V3.70(ABL.0)b0 | 05/29/2006
RomRasSize : 1457964
System up Time : 1:43:26 (9784d ticks)
Bootbase Version : V1.01 | 09/02/2005
ZyNOS CODE : RAS May 29 2006 19:16:36
Product Model : ES-2108-G