ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 137)

ES-2108 Series User’s Guide
Chapter 19 Multicast 137
19.7.1 MVR Configuration Example
The following figure shows a network example where ports 1, 2 and 3 on the switch belong to
VLAN 1. In addition, port 7 belongs to the multicast group with VID 200 to receive multicast
traffic (the News and Movie channels) from the remote streaming media server, S. Computers
A, B and C in VLAN 1 are able to receive the traffic.
Figure 68 MVR Configuration Example
To configure the MVR settings on the switch, create a multicast group in the MVR screen and
set the receiver and source ports.
Figure 69 MVR Configuration Example
To set the switch to forward the multicast group traffic to the subscribers, configure multicast
group settings in the Group Configuration screen. The following figure shows an example
where two multicast groups (News and Movie) are configured for the multicast VLAN 200.