ZyXEL Communications ZyXEL Dimension ES-2108 User Manual
Page 199
ES-2108 Series User’s Guide
Chapter 30 Introducing Commands
199
ssh
key
Disables the secure shell
server encryption key. Your
switch supports SSH versions
1 and 2 using RSA and DSA
authentication.
13
known-hosts
Removes all remote hosts.
13
known-hosts
Removes the specified remote
host from the list of all known
hosts.
13
known-hosts
[1024|ssh-
rsa|ssh-dsa]
Removes remote known hosts
with the specified public key
(1024-bit RSA1, RSA or DSA).
13
https timeout
Resets the session timeout to
the default of 300 seconds.
13
multi-login
Disables another administrator
from logging into Telnet.
14
cluster
Disables cluster management
on the switch.
13
cluster member
Removes the cluster member. 13
mvr
Disables MVR on the switch.
13
syslog
Disables syslog logging.
13
server address> Disables syslog logging to the specified syslog server. 13 server address> inactive Enables syslog logging to the specified syslog server. 13 type [type] DIsables syslog logging for the specified log type ( sys , link , config , error or report ). 13 pwr interface Disable PoE on the specified ports. (ES-2108PWR only) 13 pwr mibtrap Disables mibtraps. (ES- 2108PWR only) 13 vlan <1-4094> Enters the VLAN configuration for more information. vlan-type <802.1q|port- based> Specifies the VLAN type. 13 igmp- snooping Enables IGMP snooping. 13 8021p-priority <0-7> Sets the IEEE 802.1p priority values for IGMP control traffic. 13 host-timeout <1-16711450> Sets the host timeout value. 13 Table 74 Command Summary: Configuration Mode (continued) COMMAND DESCRIPTION PRIVILEG
E