ZyXEL Communications ZyXEL Dimension ES-2108 User Manual
Page 201
ES-2108 Series User’s Guide
Chapter 30 Introducing Commands
201
mac-filter
name
Configures a static MAC
address port filtering rule.
13
inactive
Disables a static MAC address
port filtering rule.
13
mirror-port
Enables port mirroring.
13
Sets a monitor port (the port to
which traffic is copied for
analysis).
13
mirror-
filter
ingress type
Specifies whether all incoming
traffic is copied from the
mirrored port or whether traffic
going to or coming from a
specific MAC address is
copied.
13
mac
Specifies the destination MAC
address or the source MAC
address of the device which
traffic will be copied.
13
egress
type
Specifies whether all outgoing
traffic is copied from the
mirrored port or whether traffic
going to or coming from a
specific MAC address is
copied.
13
mac
Specifies the destination MAC
address or the source MAC
address of the device which
traffic will be copied.
13
lacp
Enables Link Aggregation
Control Protocol (LACP).
13
system-priority
<1-65535>
Sets the priority of an active
port using LACP.
13
trunk
Activates a trunk group.
13
Enables LACP for a trunk
group.
13
interface list> Adds a port(s) to the specified trunk group. 13 interface list> timeout Defines the port number and LACP timeout period. 13 cluster Sets the cluster management VLAN ID. 13 name name> Configures a name to identify the cluster manager. 13 Table 74 Command Summary: Configuration Mode (continued) COMMAND DESCRIPTION PRIVILEG
E