ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 234)

ES-2108 Series User’s Guide
234 Chapter 33 Interface Commands
GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for
switches to register necessary VLAN members on ports across the network. Enable this
function to permit VLAN groups beyond the local switch.
An example is shown next.
• Enable the IEEE 802.1Q tagged VLAN command to configure tagged VLAN for the
switch.
• Enable ports one, three, four and five for configuration.
• Enable GVRP on the interface.
33.2.6 frame-type
Syntax:
frame-type
where
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Enable tagged frame-types on the interface.
33.2.7 egress set
Syntax:
egress set
where
An example is shown next.
sysname(config)# vlan1q gvrp
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# gvrp
= Choose to accept both tagged and untagged incoming frames, just
tagged incoming frames or just untagged incoming frames on a port.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# frame-type tagged
= Sets the outgoing traffic port list for a port-based VLAN.