ZyXEL Communications ZyXEL Dimension ES-2108 - Manual (Page 209)

ES-2108 Series User’s Guide
Chapter 30 Introducing Commands 209
30.11.5 config-vlan Commands
The following table lists the vlan commands in configuration mode.
Table 76 Command Summary: config-vlan Commands
COMMAND DESCRIPTION PRIVILEGE
vlan <1-
4094>
Creates a new VLAN group. 13
name
str>
Specifies a name for identification
purposes.
13
normal
list>
Specifies the port(s) to dynamically join
this VLAN group using GVRP
13
fixed
list>
Specifies the port(s) to be a permanent
member of this VLAN group.
13
forbidden Specifies the port(s) you want to prohibit
from joining this VLAN group.
13
untagged Specifies the port(s) you don’t want to tag
all outgoing frames transmitted with this
VLAN Group ID.
13
inactive Disables the specified VLAN. 13
help Displays a list of available VLAN
commands.
13
no fixed
list>
Sets fixed port(s) to normal port(s). 13
forbidden Sets forbidden port(s) to normal port(s). 13
untagged Enables VLAN tagging for outgoing traffic
on the specified port(s).
13
inactive Enables the specified VLAN. 13
ip address
default-
management
dhcp-bootp
Sets the default in-band interface to use
a static IP address in this VLAN.
The switch will use the default IP address
of 0.0.0.0 if you do not configure a static
IP address.
13
ip address Deletes the IP address and subnet mask
from this VLAN.
13
ip address
default-
gateway
Deletes the default gateway from this
VLAN.
13
exit Leaves the VLAN configuration mode. 13
ip address default-
management
dhcp-bootp
Sets the dynamic in-band IP address 13