Yamaha DIGITAL MIXING STUDIO 01X - Manual (Page 97)

01X Owner’s Manual
Function Tree/Function List
97
Before Using
Basics Section
Appendix
Getting Started
Reference
EQ ON/OFF
z – ,
( z )
ON/OFF
Turns the EQ on or off. The LOW-band EQ functions as a high-pass filter
when the Q parameter is set to HPF. It functions as a shelving-type EQ when
the Q parameter is set to L.SHELF. The L and R settings of the ST IN chan-
nel’s EQ are linked together.
No u
ATT (Attenuate) (Selected Channel only)
( w ) - 96.0dB – +12.0dB Determines the amount of pre-EQ signal attenuation in dB. No
t
■ EQ LIBRARY (Selected Channel only)
(This can be called up by pressing the same EQ button twice in a row. For example: [EQ LOW] → [EQ LOW])
See EQ High (page 98) No
EQ LOW-MID [INTERNAL] → ([SELECTED CHANNEL]) → [EQ LOW-MID]
EQ LOW-MID GAIN/EQLM-G
q – i
( y )
-18.0dB – +18.0dB
Adjusts the gain level. Pressing the [EQ LOW] and [EQ HIGH] buttons
simultaneously resets all band parameters (gain, frequency and Q) for the
selected channel.
No
EQ LOW-MID FREQUENCY/EQML-F
q – i
( t )
21.2Hz – 20.0kHz Adjusts the frequency. No
EQ LOW Q/EQL-Q
q – i
( r )
10.0 – 0.10 Determines the bandwidth of the EQ processing. No
EQ ON/OFF
z – ,
( z )
ON/OFF
Turns the EQ on or off. The L and R settings of the ST IN channel’s EQ are
linked together.
No
u
ATT (Attenuate) (Selected Channel only)
( w ) - 96.0dB – +12.0dB Determines the amount of pre-EQ signal attenuation in dB. No
t
■ EQ LIBRARY (Selected Channel only)
(This can be called up by pressing the same EQ button twice in a row. For example: [EQ LOW] → [EQ LOW])
See EQ High (page 98) No
EQ HIGH-MID [INTERNAL] → ([SELECTED CHANNEL]) → [EQ HIGH-MID]
EQ HIGH-MID GAIN/EQHM-G
q – i
( y )
-18.0dB – +18.0dB
Adjusts the gain level. Pressing the [EQ LOW] and [EQ HIGH] buttons
simultaneously resets all band parameters (gain, frequency and Q) for the
selected channel.
No
Knob
Function name/
settings
Explanation Prompt
Related
pages
Block
diagram
[PAGE SHIFT] + DISPLAY [ / ]
[PAGE SHIFT] + DISPLAY [ / ]