Digital performer, Remote function list – Yamaha DIGITAL MIXING STUDIO 01X User Manual

Page 112

112

Remote Function List

01X Owner’s Manual

Before Using

Basics Section

Appendix

Getting Started

Reference

■ Digital Performer:

On the 01X, set Remote Select (page 87) in the Utility mode to “DP.”

Button

Function

LED

Notes

(page 114)

In all modes:

[SHIFT]+[PAN]

Calls up the Mode list display.

—

[SHIFT]+[NAME/VALUE]

Turns the Meter indication on or off.

—

[SHIFT]+[REMOTE]

Enters the mode for Multi Part Editor Remote operation. Press [REMOTE] button to can-
cel the mode.

flashes

[SEL] (in normal status)

Selects a channel.

lights/goes out

[SHIFT]+[SEL] (in normal status)

Selects multiple channels.

lights/goes out

[SEL] ([SEL] flashes)

Fader touch-out (page 15)

flashes

➝

goes out

[SEL] ([AUTO EDIT] lights)

Fader touch-in (page 15)

flashes

[ON] (in normal status)

Turns each channel off or on (mutes/unmutes the signal).

lights/goes out

[ON] ([SOLO] lights)

Sets Solo for each channel to on or off.

lights/goes out

[ON] ([REC RDY] lights)

Sets the REC RDY of each channel to on or off.

lights/goes out

[AUTO EDIT]

Changes the function of the [SEL] button to the touch-in function. This button flashes
during automation touch-in.

lights

[SOLO]

Changes the function of the [ON] button to the Solo function.

lights

[REC RDY]

Changes the function of the [ON] button to the REC RDY function.

lights

[AUTO R/W] (while being pressed)

Indicates the automation condition of the channel in the LCD.

• READ....... Automation = TOUCH
• READ....... Automation = LATCH

lights

*38

[AUTO R/W]+[SEL]

Switches the automation Read function on/off, and changes automation mode to Touch.

lights

*36

[GROUP] (while being pressed)

Indicates the Group to which the fader is assigned.

—

[GROUP] and the currently lit [SEL]

Releases the Group assignment.

—

[SHIFT]+[GROUP]

Assigns the selected channels to a Group.

—

[AUDIO]/[INSTRUMENT]/
[MIDI]/[BUS/AUX]/[OTHER]

Displays the Mixer window

—

BANK []

Scrolls through the track indication every eight channels.

—

[SHIFT]+BANK []

Scrolls through the track indication channel-by-channel.

—

[LOOP]

Turns Loop on or off.

—

[F1] – [F8]

No function

—

[SHIFT]+[F1]

Displays the Track Overview.

—

[SHIFT]+[F2]

Displays the Mixer window

—

[SHIFT]+[F3]

Displays the Event List window for the selected channel.

—

*23

[SHIFT]+[F4]

Closes the current window.

—

[SHIFT]+[F5]

Displays the MIDI Edit window.

—

*23, 24

[SHIFT]+[F6]

Displays the Sequencer Editor window.

—

[SHIFT]+[F7]

Displays the Soundbites window.

—

[SHIFT]+[F8]

No function

—

[UNDO]

Executes the Undo operation.

—

[SHIFT]+[UNDO]

Executes the Redo operation.

—

[SAVE]

When the lamp lights, press this so that the lamp flashes. Press this again to execute the
Save operation (lamp turns off).

lights

➝ flashes

➝ goes out

[MARKER]

Turns the Marker on or off.

—

[SHIFT]+[MARKER]

Opens the Marker Option window.

—

[r]

Press to continuously rewind. Press again to rewind more quickly. When the Marker is
turned on, this operation moves the song position to the previous Marker.

—

[SHIFT]+[r]

Moves the song position to the top of the song.

—

[f]

Press to continuously fast-forward. Press again to fast-forward more quickly. When the
Marker is turned on, this operation moves the song position to the next Marker.

—

[

■]

Stops recording or playback.

—

[>]

Press to start playback.

lights

[

●]

Press this to start song recording. The [>] (Play) and [

●] (Rec) lamp are turned on dur-

ing recording.

lights

[ZOOM]

Switches between Scroll (lamp lights), Zoom (lamp is off), and Nudge (lamp flashes).

goes out

➝

lights

➝ flashes

FOOT SWITCH 1

Controls the function set in the Preferences in Digital Performer.

—

FOOT SWITCH 2

Controls the function set in the Preferences in Digital Performer.

—

[SCRUB]

Turns Scrub on and off. When turned on, you can use the dial to move the song position.

lights

*25