Yamaha DIGITAL MIXING STUDIO 01X User Manual

Page 18

Controls and Connectors

01X Owner’s Manual

Before Using

Basics Section

Appendix

Getting Started

Reference

!6 [REMOTE] button

This button selects the Remote mode, enabling you to con-

trol DAW (digital audio workstation) software on a con-

nected computer (page 23). In this condition, the MIXER/

LAYER buttons (page 19) function according to their

upper names ([AUDIO], [INST], [MIDI], [BUS/AUX],

[OTHER]).

!7 [INTERNAL] button

This button selects the Internal mode, enabling normal

internal operation of the 01X (pages 37, 85). In this condi-

tion, the MIXER/LAYER buttons (page 19) function

according to their lower names.

!8 [SCENE] button

This button selects the Scene mode, enabling you to store

and recall Scenes (page 85).

!9 [UTILITY] button

This button selects the UTILITY mode, enabling you to set

the global settings for the entire system (page 86). Press-

ing [UTILITY] from any of the Utility pages automatically

calls up the Menu Select display (page 87).

@0 [MONITOR A/B] button

This indicates (and can be used to set) the balance between

the levels of the stereo output of the internal mixer and the

stereo output from the DAW software to the monitor out/

headphones. Pressing the switch alternates between the

two settings: A (lamp is lit) and B (lamp is off). The set-

ting can be changed by holding the [MONITOR A/B] but-

ton and turning the appropriate knob ([5] or [7]).

MODE

@1
@3

#5
#6

@4 @5 @6 @7

!7 !8 !9 @0