Parameter lists ● delay->rev, Dist->delay, Multi filter – Yamaha DIGITAL MIXING STUDIO 01X User Manual
Page 136
Before Using
Basics Section
Appendix
Getting Started
Reference
136
01X Owner’s Manual
Parameter Lists
● DELAY->REV
One input, two output delay and reverb effects in series.
● DIST->DELAY
One input, two output distortion and delay effects in series.
● MULTI FILTER
Two input, two output 3-band multi-filter (24 dB/octave).
Parameter
Range
Description
DELAY L
0.0–1000.0 ms
Left channel delay time
DELAY R
0.0–1000.0 ms
Right channel delay time
FB. DLY
0.0–1000.0 ms
Feedback delay time
FB. GAIN
–99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback)
DELAY HI
0.1–1.0
Delay high-frequency feedback ratio
HPF
THRU, 21.2 Hz–8.00 kHz
High-pass filter cutoff frequency
LPF
50.0 Hz–16.0 kHz, THRU
Low-pass filter cutoff frequency
DLY.BAL
0–100%
Delay and delayed reverb balance (0% = all delayed reverb, 100% = all delay)
REV TIME
0.3–99.0 s
Reverb time
INI. DLY
0.0–500.0 ms
Initial delay before reverb begins
REV HI
0.1–1.0
High-frequency reverb time ratio
DIFF.
0–10
Spread
DENSITY
0–100%
Reverb density
Parameter
Range
Description
DST TYPE
DST1, DST2, OVD1,
OVD2, CRUNCH
Distortion type (DST = distortion, OVD = overdrive)
DRIVE
0–100
Distortion drive
MASTER
0–100
Master volume
TONE
–10 to +10
Tone control
N. GATE
0–20
Noise reduction
DELAY
0.0–2725.0 ms
Delay time
FB. GAIN
–99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase feedback)
HI. RATIO
0.1–1.0
High-frequency feedback ratio
FREQ.
0.05–40.00 Hz
Modulation speed
DEPTH
0–100%
Modulation depth
DLY.BAL
0–100%
Distortion and delay balance (0% = all distortion, 100% = all delayed distortion)
Parameter
Range
Description
TYPE 1
HPF, LPF, BPF
Filter 1 type: high pass, low pass, band pass
TYPE 2
HPF, LPF, BPF
Filter 2 type: high pass, low pass, band pass
TYPE 3
HPF, LPF, BPF
Filter 3 type: high pass, low pass, band pass
FREQ. 1
28.0 Hz–16.0 kHz
Filter 1 frequency
FREQ. 2
28.0 Hz–16.0 kHz
Filter 2 frequency
FREQ. 3
28.0 Hz–16.0 kHz
Filter 3 frequency
LEVEL 1
0–100
Filter 1 level
LEVEL 2
0–100
Filter 2 level
LEVEL 3
0–100
Filter 3 level
RESO. 1
0–20
Filter 1 resonance
RESO. 2
0–20
Filter 2 resonance
RESO. 3
0–20
Filter 3 resonance