Yamaha DIGITAL MIXING STUDIO 01X - Manual (Page 111)

01X Owner’s Manual
Remote Function List
111
Before Using
Basics Section
Appendix
Getting Started
Reference
[f]
Forward (or Fast Forward). When the Marker is turned on, this operation moves the song
position to the next Marker.
— *33
[SHIFT]+[f]
Moves the song position to the end of the song. When the Marker is turned on, this oper-
ation opens the window for entering the Marker.
—
[ ■] Stops recording or playback. —
[>] Press to start playback. lights *33
[ ●]
Press this to start song recording. The [>] (Play) and [ ●] (Rec) lamp are turned on dur-
ing recording.
lights
[SHIFT]+[ ●] Starts recording automation. The [>] button lights while data is being recorded. —
[ZOOM] Turns Zoom on and off. lights
FOOT SWITCH 1 Foot SW A as defined in SONAR. —
FOOT SWITCH 2 Foot SW B as defined in SONAR. —
Dial Controls one of these three functions: Scrub, moving of the song position, or data entry. —
[SCRUB]
Turns Scrub on and off. When Scrub is on, the dial can be used for Scrub playback.
When Scrub is off, the dial is used to move the song position.
lights/goes out *20
[SHIFT]+[SCRUB] Activates data entry for the dial. flashes
TRACK mode [SHIFT]+[PAN] (Track Parameter mode)
[SHIFT]+[PAN]
➝ [SHIFT]+[PAN] (Selected Channel mode)
lights
Knobs 1 – 8 (turning) For editing parameters. — *18
Knobs 1 – 8 (pressing) For editing parameters./Resets the parameter value to its default. *22 —
PAN mode [PAN]
[PAN]
➝ [PAN] (Selected Channel mode of PAN/SURROUND) lights
Knobs 1 – 8 (turning) For editing parameters. — *18
Knobs 1 – 8 (pressing) For editing parameters./Resets the parameter value to its default. *22 —
SEND mode [SEND]
[SEND]
➝ [SEND] (Selected Channel mode) lights *31
Knobs 1 – 8 (turning) For editing parameters. — *18
Knobs 1 – 8 (pressing) For editing parameters./Resets the parameter value to its default. *22
PLUG-IN mode [SHIFT]+[PLUG-IN]
[SHIFT]+[PLUG-IN]
➝ [SHIFT]+[PLUG-IN] (Selected Channel mode)
lights *21
[SHIFT]+DISPLAY [ / ] Changes the Plug-in number. — *11
Knobs 1 – 8 (turning) For editing parameters. — *18, 34
Knobs 1 – 8 (pressing) For editing parameters./Resets the parameter value to its default. *22 — *34
EQ mode [EQ LOW]/[EQ LOW-MID]/[EQ HIGH-MID]/[EQ HIGH]
[EQ LOW]/[EQ LOW-MID]/[EQ HIGH-MID]/[EQ HIGH]
➝
[EQ LOW]/[EQ LOW-MID]/[EQ HIGH-MID]/[EQ HIGH] (Selected Channel mode)
(in the Selected Channel mode) [EQ LOW]/[EQ LOW-MID]/[EQ HIGH-MID]/[EQ HIGH] (Band mode)
lights
Knobs 1 – 8 (Band mode) For editing each frequency band. —
Faders (Band mode) For editing the gain of each Band. —
[SHIFT]+DISPLAY [ / ] Changes the EQ number. — *11
DYNAMICS (Compressor) mode [DYNAMICS]
[DYNAMICS] ➝ [DYNAMICS] (Selected Channel mode)
lights
[SHIFT]+DISPLAY [ / ] Changes a DYN number. — *11
Knobs 1 – 8 (turning) For editing parameters. — *18
Knobs 1 – 8 (pressing) For editing parameters./Resets the parameter value to its default. *22 —
Button Function LED
Notes
(page 114)