Yamaha DIGITAL MIXING STUDIO 01X User Manual

Page 20

Controls and Connectors

01X Owner’s Manual

Before Using

Basics Section

Appendix

Getting Started

Reference

These buttons are used primarily for controlling song play-

back/recording on your DAW software. They also let you

control the software no matter which mode is selected,

Remote or Internal. The functions are the same as the

transport buttons in the software (page 104). On the SQ01

for example, the buttons function as follows.

#7 [r] (Rewind) button

Causes the song location to rewind.

#8 [f] (Forward) button

Causes the song location to fast forward.

#9 [■] (Stop) button

Stops playback or recording of the song. By connecting an

optional Foot Switch (page 23), you can also control this

by foot.

$0 [>] (Play) button

Starts song playback. If the Record button is On, record-

ing will begin. By connecting an optional Foot Switch

(page 23), you can also control this by foot.

$1 [●] (Record) button

Enables recording standby. Pressing this again cancels

recording standby.

$2 [MARKER] button

To enter a marker at a selected location in the song, turn

this button on and press the [WRITE] button.

• Move to the next marker location by using

[MARKER] and the [f] (Forward) button.

• Move to the previous marker location by using

[MARKER] and the [r] (Rewind) button.

• To delete a marker, move to the location of the

marker and press the [MARKER] and [WRITE] but-

ton again.

$3 [ZOOM] button

When the 01X is set to Remote mode, this button turns

Zoom on and off.

$4 Cursor [ / / / ] (Left/Right/Up/Down)

buttons

For moving the cursor and navigating in the DAW display.

$5 Dial (Rotary Encoder)

Moves the song position (pointer/line).

$6 [SCRUB] button

When this is set to on, the dial can be used for the Scrub

function.

Transport Buttons

#8 #9