Yamaha DIGITAL MIXING STUDIO 01X - Manual (Page 41)

01X Owner’s Manual
Basic Operations
41
Before Using
Basics Section
Appendix
Getting Started
Reference
● Selected Channel mode
To select a channel on the 01X, press the corresponding
[SEL] button. The channel is selected and the [SEL] button
lamp lights up.
● Stereo Input Channel
For stereo input channels, you can set the left and right
panpots individually. Repearedly pressing the STEREO
[SEL] button toggles between the left and right channels.
• L- : indicates the left channel pan settings of the ste-
reo input channel.
• R- : indicates the right channel pan settings of the
stereo input channel.
Entering Characters (Title Edit)
You can freely name the stored Library. The following data
types can be named.
• Scene Library (page 85)
• Input Patch Library (page 89)
• Output Patch Library (page 91)
• EQ Library (page 99)
• Dynamics Library (page 100)
• Effect Library (page 103)
• Channel Library (page 103)
The instructions below apply to naming of any of the
Libraries.
• Library titles are named after the Libraries themselves have been
stored.
• This operation only saves the data of the Library name. Other setting
data is not saved until you actually store the Library (pages 50, 54).
q Turn any of the channel knobs [1]- [4] to select the
desired Library number for naming.
w Press any of the channel knobs [1]- [4] to edit the first
position of the name. The first character of the name
flashes.
• To cancel the operation, press channel knob [7] (EXIT).
e Turn any of the channel knobs [2] - [4] to move the cur-
sor to the desired position.
• Keep in mind that turning channel knob [1] exits from the title edit
operation.
PAN
L-L63 L-L63
PAN
R-R63 L-L63
SCENE LIBRARY SCENE No. [ 05]
05 [Initial Data ] CHAR INSERT EXIT/OK