Yamaha DIGITAL MIXING STUDIO 01X - Manual (Page 15)

01X Owner’s Manual
01X Terminology
15
Before Using
Basics Section
Appendix
Getting Started
Reference
■ Automation
A function by which adjustments of mixer parameters via
the knobs and faders are recorded in real time, and are
exactly reproduced during playback.
The 01X works in tandem with DAW (digital audio work-
station) software such as SQ01, Cubase SX/SL, etc.--
recording operations on the DAW software by using the
Remote Control function, and features synchronized oper-
ation of the mixer functions on the DAW and fader opera-
tions on the 01X. The particular methods of recording
automation data differ depending on the DAW. The fol-
lowing terms are examples from the SQ01.
● Touch
Only data of fader or knob operations is recorded.
● Latch
Fader and knob operations are recorded from the start
until the song stops.
■ Bank
This refers to a group of channels that can be simulta-
neously controlled from the panel. This is the DAW equiv-
alent for mixing “layers” in the Internal mode. Groups of
eight channels on the DAW software can be selected for
mixing, just as the layer groups 1 - 8, 9 - 16, and 17 - 24
are selected on the 01X. For details, refer to the Remote
Function List on page 104.
■ Moving faders
This describes faders that automatically move to recorded
positions as they are recalled—for example, when select-
ing a different mixing layer channel group or recalling a
Scene from memory. On the 01X, all nine faders (includ-
ing the ST channel) are moving faders. This is very conve-
nient, since the faders move according to the parameter
changes during automation playback, providing visual
confirmation of the mixdown status. (Also called “motor-
ized faders.”)
■ Touch-in/Touch-out
In automation, the initial movement of a fader is referred to
as “touch-in,” while the releasing of the fader is called
“touch-out.” The 01X registers touch-in when a fader
starts moving, and registers touch-out not at the physical
release of the fader but after the elapsed “Timeout” time
(page 88). The [SEL] button flashes when touch-in starts
(when automation recording is active). You can manually
touch-out or stop recording automation before the “Time-
out” by pressing the [SEL] button. It is also possible to
start touch-in manually without moving the fader, by
pressing the [SEL] button when the [AUTO EDIT] button
is ON.
Remote Control Terms