ZyXEL Communications P-661H Series - Manual (Page 70)

P-661H/HW Series User’s Guide
70 Chapter 3 Wizards
Figure 31 Manually assign a WEP key
The following table describes the labels in this screen.
5 Click Apply to save your wireless LAN settings.
Table 19 Manually assign a WEP key
LABEL DESCRIPTION
Key The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless
stations must use the same WEP key for data transmission.
Enter any 5, 13 or 29 ASCII characters or 10, 26 or 58 hexadecimal characters ("0-9",
"A-F") for a 64-bit, 128-bit or 256-bit WEP key respectively.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.