ZyXEL Communications P-661H Series - Manual (Page 277)

P-661H/HW Series User’s Guide
Chapter 19 System 277
19.2 Time Setting
To change your ZyXEL Device’s time and date, click Maintenance > System > Time
Setting. The screen appears as shown. Use this screen to configure the ZyXEL Device’s time
based on your local time zone.
Figure 166 System Time Setting
Admin Password In addition to the wizard setup, a user logs in with the admin password can also view
and configure the advanced features on the ZyXEL Device.
Old Password Type the default administrator password (1234) or the existing password you use to
access the system for configuring advanced features in this field.
New Password Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type. After you change
the password, use the new password to access the ZyXEL Device.
Retype to
Confirm
Type the new password again for confirmation.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.
Table 114 System General Setup
LABEL DESCRIPTION