ZyXEL Communications P-661H Series - Manual (Page 67)

P-661H/HW Series User’s Guide
Chapter 3 Wizards 67
Figure 28 Wireless LAN Setup Wizard 1
The following table describes the labels in this screen.
3 Configure your wireless settings in this screen. Click Next.
Table 16 Wireless LAN Setup Wizard 1
LABEL DESCRIPTION
Active Select the check box to turn on the wireless LAN.
Enable OTIST Select the check box to enable OTIST if you want to transfer your ZyXEL
Device’s SSID and WPA-PSK security settings to wireless clients that support
OTIST and are within transmission range.
You must also activate and start OTIST on the wireless client at the same time.
The process takes three minutes to complete.
Note: Enable OTIST only if your wireless clients support WPA
and OTIST
Setup Key Type an OTIST Setup Key of up to eight ASCII characters in length. Be sure to
use the same OTIST Setup Key on the ZyXEL Device and wireless clients.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.