ZyXEL Communications ZyXEL Dimension GS-3012F - Manual (Page 190)

Dimension GS-3012F Gigabit Ethernet Switch
28-16 Introduction to CLI
Table 28-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
policy classifier
<
[vlan]
[egress-port num>]
[priority <0-7>]
[dscp <0-63>]
[tos <0-7>]
[bandwidth
]
[outgoing-packet-
format
]
[out-of-profile-
dscp <0-63>]
[forward-action
]
[queue-action
queue|prio-replace-
tos>]
[diffserv-action
replace-
priority|diff-set-
dscp>]
[outgoing-mirror]
[outgoing-eport]
[outgoing-non-
unicast-eport ]
[outgoing-set-vlan
]
[metering]
[out-of-profile-
action <[change-
dscp][drop][
forward]>]
[inactive]>
Configures a policy. A classifier
distinguishes traffic into flows
based on the configured criteria. A
policy rule ensures that a traffic
flow gets the requested treatment
in the network.
radius-server host [acct-
port number>] [key string>]
Sets the IP address of the external
RADIUS server, UDP port and
shared key.
port-access-
authenticator
Enables 802.1x authentication on
the switch.
Enables 802.1x authentication on
the specified port(s).