ZyXEL Communications ZyXEL Dimension GS-3012F - Manual (Page 183)

Dimension GS-3012F Gigabit Ethernet Switch
Introduction to CLI 28-9
Table 28-2 Command Summary: Enable Mode
COMMAND DESCRIPTION
known-hosts Displays known SSH hosts information.
key
Displays the SSH public and private keys
session Displays current SSH session(s).
https Displays the HTTPS information.
session Displays current HTTPS session(s).
certificate Displays the HTTPS certificates.
key Displays the HTTPS key.
timeout Displays the HTTPS session timeout.
multi-login Displays multi-login information
plt Displays Packet Loop Test (PLT).
mac-aging-time Displays MAC learning aging time.
cluster Displays cluster management status.
candidates Displays cluster candidate information.
member mac addr> Displays the MAC address of the cluster
member(s).
member Displays the status of the cluster
member(s).
members config Displays the configuration of the cluster
member(s).
mac-flush Clears the MAC address table.
Removes all learned MAC address on
the specified port(s).
erase running-config Resets to the factory default settings.
boot config Performs a system cold start, checks the
hardware and restarts using the specified
configuration file.
reload config Performs a system warm start, checks
the configuration and restarts using the
specified configuration file.
write memory Saves the configuration to the
configuration file the switch is currently
using.
Saves the configuration to the specified
configuration file on the switch.
copy running-config tftp Backs up running configuration to the
specified TFTP server with the specified
file name.