ZyXEL Communications ZyXEL Dimension GS-3012F - Manual (Page 187)

Dimension GS-3012F Gigabit Ethernet Switch
Introduction to CLI 28-13
Table 28-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
option Disables the relay agent
information option 82.
information System name is not appended to
option 82 information field.
cluster Disables cluster management on
the switch.
member
address>
Removes the cluster member.
ssh key Deletes the secure shell server
encryption key and regenerates a
new key. Your switch supports
SSH versions 1 and 2 using RSA
and DSA authentication.
known-hosts
ip>
Removes the specified remote
hosts from the list of all known
hosts.
known-hosts
ip> [1024|ssh-
rsa|ssh-dsa]
Removes remote known hosts with
the specified public key (1024-bit
RSA1, RSA or DSA).
https timeout Resets the session timeout to the
default of 300 seconds.
multi-login Disables another administrator
from logging into Telnet or the CLI.
vlan-type <802.1q|port-based> Specifies the VLAN type.
ip route Creates a static route.
[metric ]
[name ]
[inactive]
Sets the metric of a static route or
deactivates a static route.
name-server Sets the IP address of a domain
name server.
address default-
gateway
Sets the default gateway’s IP
address for the out-of-band
management port.
address Sets the IP address and subnet
mask of the out-of-band
management port.
mac-forward name mac
vlan
interface
Configures a static MAC address
forwarding rule.