ZyXEL Communications ZyXEL Dimension GS-3012F - Manual (Page 180)

Dimension GS-3012F Gigabit Ethernet Switch
28-6 Introduction to CLI
28.9 Command Summary
The following sections summarize the commands available in the switch together with a brief description of each
command. Commands listed in the tables are in the same order as they are displayed in the CLI. See the related
section in the User’s Guide for more background information.
28.9.1 User Mode
The following table describes the commands available for User mode.
Table 28-1 Command Summary: User Mode
COMMAND DESCRIPTION
help Displays help information.
logout Exits from the CLI.
exit Logs out from the CLI.
history Displays a list of previously command(s)
that you have executed. The switch
stores up to 256 commands in history.
enable Accesses Enable (or privileged) mode.
show
hardware-monitor Displays current hardware monitor
information with the specified
temperature unit (Celsius C or
Fahrenheit F).
ip Displays IP related information.
system-information Displays general system information.
ping
[
band|vlan ]
[size <0-1472>]
[-t]
Sends a Ping request to an Ethernet
device.
traceroute
[in-band|out-of-
band|vlan ]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a
device.
ssh <1|2> <[user@]dest-ip> Connects to an SSH server with the
specified SSH version.
28.9.2 Enable Mode
The following table describes the commands available for Enable mode.