ZyXEL Communications ZyXEL Dimension GS-3012F - Manual (Page 101)

GS-3012F User’s Guide
Bandwidth Control 11-1
Chapter 11
Bandwidth Control
This chapter shows you how you can cap the maximum bandwidth allowed from specific source(s) to
specified destination(s) using the Bandwidth Control setup screen.
11.1 Introduction to Bandwidth Control
Bandwidth control means defining a maximum allowable bandwidth for incoming and/or out-going traffic flows
on a port. Click Advanced Application and then Bandwidth Control in the navigation panel to bring up the
screen as shown next.
Figure 11-1 Bandwidth Control
The following table describes the labels in this screen.
Table 11-1 Bandwidth Control
LABEL DESCRIPTION
Active Select this check box to activate bandwidth control.
Port This field displays the port number.
Active Make sure to select this check box to activate your rule. You may temporarily deactivate a rule
without deleting it by deselecting this check box.