ZyXEL Communications ZyXEL Dimension GS-3012F - Manual (Page 189)

Dimension GS-3012F Gigabit Ethernet Switch
Introduction to CLI 28-15
Table 28-3 Command Summary: Configure Mode
COMMAND DESCRIPTION
classifier
<[packet-format
<802.3untag|802.3ta
g|
EtherIIuntag|EtherI
Itag>] [priority
<0-7>]
[vlan ]
[ethernet-type
arp|rarp|
appletalk|decnet|
sna|netbios|dlc>]
[source-mac mac-addr>]
[source-port
num>] [destination-
mac addr>]
[dscp <0-63> ]
[ip-protocol
num|tcp|udp|icmp|eg
p| ospf|rsvp|igmp|
igp|pim|ipsec>
[establish-only]]
[source-ip
addr> [mask-bits
]]
[source-socket
]
[destination-ip
[mask-bits
bits>]]
[destination-socket
]
[inactive]>
Configures a classifier. A classifier
groups traffic into data flows
according to specific criteria such
as the source address, destination
address, source port number,
destination port number or
incoming port number.