Texas Instruments TMS320C6202 - Manual (Page 37)

TMS320C6202
FIXED-POINT DIGITAL SIGNAL PROCESSOR
SPRS072B – AUGUST 1998 – REVISED AUGUST 1999
37
POST OFFICE BOX 1443
•
HOUSTON, TEXAS 77251–1443
SYNCHRONOUS DRAM TIMING
timing requirements for synchronous DRAM cycles (see Figure 17)
NO
’C6202-200 ’C6202-233 ’C6202-250
UNIT NO.
MIN MAX MIN MAX MIN MAX
UNIT
7 tsu(EDV-CKO2H) Setup time, read EDx valid before CLKOUT2 high 1 1 0.5 ns
8 th(CKO2H-EDV) Hold time, read EDx valid after CLKOUT2 high 3 3 3 ns
switching characteristics for synchronous DRAM cycles †‡ (see Figure 17–Figure 22)
NO PARAMETER
’C6202-200 ’C6202-233 ’C6202-250
UNIT NO. PARAMETER
MIN MAX MIN MAX MIN MAX
UNIT
1 tosu(CEV-CKO2H)
Output setup time, CEx valid
before CLKOUT2 high
2P – 6 2P – 4.6 2P – 4 ns
2 toh(CKO2H-CEV)
Output hold time, CEx valid after
CLKOUT2 high
1.5 1.5 1.5 ns
3 tosu(BEV-CKO2H)
Output setup time, BEx valid
before CLKOUT2 high
2P – 6 2P – 4.6 2P – 4 ns
4 toh(CKO2H-BEIV)
Output hold time, BEx invalid after
CLKOUT2 high
1.5 1.5 1.5 ns
5 tosu(EAV-CKO2H)
Output setup time, EAx valid
before CLKOUT2 high
2P – 6 2P – 4.6 2P – 4 ns
6 toh(CKO2H-EAIV)
Output hold time, EAx invalid after
CLKOUT2 high
1.5 1.5 1.5 ns
9 tosu(CASV-CKO2H)
Output setup time,
SDCAS/SSADS valid before
CLKOUT2 high
2P – 6 2P – 4.6 2P – 4 ns
10 toh(CKO2H-CASV)
Output hold time, SDCAS/SSADS
valid after CLKOUT2 high
1.5 1.5 1.5 ns
11 tosu(EDV-CKO2H)
Output setup time, EDx valid
before CLKOUT2 high§
2P – 6 2P – 4.6 2P – 4 ns
12 toh(CKO2H-EDIV)
Output hold time, EDx invalid after
CLKOUT2 high
1.5 1.5 1.5 ns
13 tosu(WEV-CKO2H)
Output setup time, SDWE/SSWE
valid before CLKOUT2 high
2P – 6 2P – 4.6 2P – 4 ns
14 toh(CKO2H-WEV)
Output hold time, SDWE/SSWE
valid after CLKOUT2 high
1.5 1.5 1.5 ns
15 tosu(SDA10V-CKO2H)
Output setup time, SDA10 valid
before CLKOUT2 high
2P – 6 2P – 4.6 2P – 4 ns
16 toh(CKO2H-SDA10IV)
Output hold time, SDA10 invalid
after CLKOUT2 high
1.5 1.5 1.5 ns
17 tosu(RASV-CKO2H)
Output setup time, SDRAS/SSOE
valid before CLKOUT2 high
2P – 6 2P – 4.6 2P – 4 ns
18 toh(CKO2H-RASV)
Output hold time, SDRAS/SSOE
valid after CLKOUT2 high
1.5 1.5 1.5 ns
† P = 1/CPU clock frequency in ns. For example, when running parts at 250 MHz, use P = 4 ns.
‡ SDCAS/SSADS, SDRAS/SSOE, and SDWE/SSWE operate as SDCAS, SDRAS, and SDWE, respectively, during SDRAM accesses.
§ For the first write in a series of one or more consecutive adjacent writes, the write data is generated one CLKOUT2 cycle early to accommodate
the ED enable time.
ADV
ANCE INFORMA
TION