Toshiba E-STUDIO 351C - Manual (Page 67)

2. Installing Client Software
Printing Guide — Installing Client Software for Windows 67
8. Make sure the created LPR port is checked in the “Print to
the following port” list and click [OK] to save settings.
NOTE: Before using the printer driver for printing, please configure the installed options of the
equipment and department code (if required) on the printer driver.
P.194 "Before Using the Printer Driver"
— Windows 2000/XP/Server 2003
Configuring the Raw TCP/LPR port for Windows 2000/XP/Server 2003
The following describes an installation on Windows 2000. The procedure is the same
when Windows XP or Windows Server 2003 is used.
NOTE: You must log into Windows as a user who has the “Administrators” or “Power Users”
privilege when using Windows 2000, Windows XP, or Windows Server 2003.
1.
Install the client software using the installer in the Client Util-
ities CD-ROM.
• Please install the client software following the instruction of the installation
for parallel printing.
P.27 "Installation for Parallel Printing Using the Installer"