Toshiba E-STUDIO 351C - Manual (Page 54)

2. Installing Client Software
54 Printing Guide — Installing Client Software for Windows
— Windows 98/Me
Installing the printer driver for USB printing by Plug and Play
The following describes an installation on Windows 98. The procedure is the same
when Windows Me is used.
1.
Power on this equipment and your computer.
2.
Insert the Client Utilities CD-ROM into the CD-ROM drive.
• When inserting the Client Utilities CD-ROM, the installer may automatically
start. Click [Cancel] to exit the installer and continue the operation.
3. Connect the USB cable to this equipment and your com-
puter.
• The Add New Hardware Wizard dialog box appears.
NOTE: When you are installing the printer driver for USB printing on Windows Me, the USB
port driver automatically installed. In that case, please skip to step 11.
4. Click [Next].
5. Select “Search for the best driver for your device (Recom-
mended)” and click [Next].