Toshiba E-STUDIO 351C - Manual (Page 311)

3. Printing
Printing Guide — Printing from UNIX 311
NOTES: • The banner page is designed to fit Statement / A5 and bigger paper. If the paper
selected is smaller, the banner page may wrap onto two (2) pages.
• The default is that the banner page is printed before the job so that it is in the correct
stacking order.
• When the language is set to “raw” the banner is always disabled.
• The paper source and the media type for the banner page can be set to different
values than the job’s paper source and media type. If a banner paper source is not
specified then the auto source command is sent. If a banner media type is not spec-
ified then no banner media type command is sent, so the printer’s default value will
be used.
• If the file being printed specifies the paper destination or the paper size internally the
banner page may print to the wrong output or on an incorrect paper size.
Banner Options
The banner page can be printed using the following options.
The default value for this option is that the banner page prints first.
Banner Paper Source
The banner paper source can be specified using the following option.
If the banner paper source is not specified the PCL5e auto paper source command
“&l7H” will be sent. The banner page source cannot be set to manual feed. The
paper size always has priority over the paper source.
Example: The command to specify that the banner page paper source is the LCF is
“lp –o blcf filename”.
Option Value Alternate Value Description
banner=last Print the banner page after the job so that it will be
physically on top of the job in the output tray.
banner=first banner Print the banner page before the job so that it will be
physically under the job in the output tray.
nobanner nb Do not print a banner. The ability to specify the “noban-
ner” option can be disabled by the system administrator
to force all jobs to print with a banner.
Option Value Alternate Value Description
bauto-source Select the auto paper tray selection.
bdrawer1 bupper
bcas1 Select the 1st drawer.
bdrawer2 blower
bcas2 Select the 2nd drawer.
bdrawer3 bpedupper
bcas3 Select the 3rd drawer.
bdrawer4 bpedlower
bcas4 Select the 4th drawer.
blcf BLCF Select the large capacity feeder. LCF is not available
for some countries or regions.