Toshiba E-STUDIO 351C - Manual (Page 172)

2. Installing Client Software
172 Printing Guide — Installing Client Software for UNIX
4. Open your Linux/UNIX editor.
5. Create the following file.
/etc/lp/interfaces/.conf
6. Add a line as below in the .conf.
dest=
7. Save the file.
8. Enter the following command:
mkque -q \
-a s_statfilter = /usr/lib/lpd/bsdshort \
-a up = TRUE -a host = -a rq = dssc
9.
Enter the following command:
mkquedev -q -d dev_ \
-a backend = /opt/toshiba/tap/bin/est451cBackend
10. Enter the following command:
cp /usr/lib/lpd/pio/predef/net_est451c \
/opt/toshiba/tap/filter/
Creating a print queue manually on Linux
1. Enter the following command:
ls /opt/toshiba/tap/interface
2. If the above directory does not exist, enter the following
command:
mkdir /opt/toshiba/tap/interface
3. As root open your Linux/UNIX editor.
4. Open your Linux/UNIX editor.
5.
Create the following file.
/opt/toshiba/tap/interface/.conf
6.
Add a line as below in the .conf.
dest=
7.
Save the file.
8.
Enter the following command:
cp /opt/toshiba/tap/model/net_est451c \
/opt/toshiba/tap/interface/
9. Enter the following command:
/opt/toshiba/tap/bin/modPrintcap \
-a
10. Enter the following command:
ls /opt/toshiba/tap/bin/flag_