Toshiba E-STUDIO 351C - Manual (Page 301)

3. Printing
Printing Guide — Printing from UNIX 301
If this option is not specified, the default value of “nopunch” will be used.
This function is not available for all paper sizes and the users should refer to the copier
manual for a list of compatible paper sizes. In particular, A5, A6 and statement paper
sizes will not work with this function.
Example: The command to hole punch the long edge feed portrait page is
“lp –o punch=1 filename”.
— Media Type
The paper source can also be selected using the media type using the following option.
In PostScript Deferred Media Selection is always turned on so the paper size has prior-
ity over the media type and the paper source.
In PCL5e the paper size always has priority over the media type and the paper source.
If this option is not specified, the default value will be used.
Example: The command to specify Thick1 media type is “lp –o mtype=Thick1 filename”.
— Paper Source
The paper source can be selected using the following options.
punch=1 Hole punch long edge without rotation.
punch=2 Hole punch short edge without rotation.
punch=3 Hole punch long edge with 180 degree rotation.
punch=4 Hole punch short edge with 180 degree rotation.
Option Value Alternate Value Description
mtype=Plain The paper source that contains Plain paper is
requested.
mtype=
Transparency The paper source that contains transparency slides is
requested.
mtype=Thick1 The paper source that contains Thick1 paper is
requested.
mtype=Thick2 The paper source that contains Thich2 paper is
requested.
mtype=Thick3 The paper source that contains Thich3 paper is
requested.
Option Value Alternate Value Description
auto-source Select auto paper tray selection.
manual Select stack feed bypass.
drawer1 upper
cas1 Select the 1st drawer.
drawer2 lower
cas2 Select the 2nd drawer.
drawer3 pedupper
cas3 Select the 3rd drawer.
Option Value Alternate Value Description