Toshiba E-STUDIO 351C User Manual
Page 332
4. Monitoring Print Jobs
332
Printing Guide — Monitoring Print Jobs with TopAccessDocMon
Adding new device by searching the printer automatically
1.
Click [Add Device] in the Device Status tab.
•
The TopAccessDocMon Network Discovery dialog box appears.
2.
Click [Start Discovery] to begin the process.
•
TopAccessDocMon locates the compatible printers in your network.
SUPPLEMENTS:
•
You can quit the process by clicking [Stop Discovery].
•
It may not find the device that is located in the different segment. If a device cannot
be found, find a device manually from the [Manual Selection] button.
P.333 "Adding new device by entering the printer address manually"
3.
When the process is complete, the printers that have been
found are listed in the “Discovered Device” list.
SUPPLEMENT:
If the process continues for a long time, it is because too many network clients are on
the network. Also, you must change the discover settings if you want to search for a
printer in the IPX/SPX network. In this case, you can configure the discovery settings
using the [Advanced] button.