Toshiba E-STUDIO 351C - Manual (Page 335)

4. Monitoring Print Jobs
Printing Guide — Monitoring Print Jobs with TopAccessDocMon 335
4. Entered printer is added in the “Monitoring Device” list.
Click [OK].
Configuring Network Discovery Settings
You can configure the discovery settings for the Network Discovery in the Discovery
Settings dialog box.
1) Devices - Find TOSHIBA Devices
Check on this to search only for TOSHIBA devices in your network, such as the e-
STUDIO451c Series, e-STUDIO850 Series, e-STUDIO4511 Series, e-STUDIO450
Series, e-STUDIO280 Series, GL-1020, GL-1010 and SC-2.
2) Devices - Find All Devices on the Network
Check on this to search for all compatible devices can be detected.
3) Network - Enable IPX/SPX Search
Check on this to search for printers connected to the IPX/SPX network. This is
available only when the IPX/SPX protocol and Novell Client are installed in your
computer, and the computer is connected to the NetWare server.
4) Network - Enable TCP/IP Search
Check on this to search for printers connected to the TCP/IP network. This is avail-
able only when the TCP/IP protocol is installed in your computer.
When this is enabled, select how TopAccessDocMon should search for printers in
the TCP/IP network.
-
Search local subnet — Select this to search for printers in local subnet.