Toshiba E-STUDIO 351C User Manual
Page 294
3. Printing
294
Printing Guide — Printing from Macintosh
-
Long Edge Punch with 180 degree rotation — Select this to create holes on
the right side for the portrait document, or on the bottom for the landscape docu-
ment.
-
Short Edge Punch with 180 degree rotation — Select this to create holes on
the bottom for the portrait document, or on the left for the landscape document.
NOTE:
This option cannot be selected if a hole punch unit is not installed.
3) Stapling
This sets whether a print job is stapled.
-
Off — Select this to print without stapling.
-
Upper Left (Portrait)/Upper Right (Landscape) — Select this to staple in the
upper left for the portrait document, or in the upper right for the landscape docu-
ment.
-
Middle Left (Portrait)/Middle Top (Landscape) — Select this to staple double
in the left for the portrait document, or in the top for the landscape document.
-
Lower Left (Portrait)/Upper Left (Landscape) — Select this to staple in the
lower left for the portrait document, or in the upper left for the landscape docu-
ment.