Texas Instruments MSC1210 - Manual (Page 312)

Bit Addressable SFRs (alphabetical)
F-2
F.1 Bit Addressable SFRs (alphabetical)
Enable Interrupt Control (EICON)
SFR Name: EICON
SFR Address: D8
H
Bit-Addressable: Yes
Bit Definitions:
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
Name SMOD1 — EAI AI WDTI — — —
Bit Address DFH DEH DDH DCH DBH DAH D9H D8H
SMOD1—Serial Port 1 Mode. 0 = Normal baud rate for serial port 1, 1 = Serial
port 1 baud rate doubled.
EAI—Enable Auxiliary Interrupt. 1 = Interrupt enabled.
AI—Auxiliary Interrupt Flag. 1 = Auxiliary interrupt pending, will trigger inter-
rupt if EAI bit set.
WDTI—Watchdog Interrupt Flag. 1 = Watchdog interrupt pending, will trig-
ger interrupt if Watchdog interrupt enabled.
Extended Interrupt Enable (EIE)
SFR Name: EIE
SFR Address: E8
H
Bit-Addressable: Yes
Bit Definitions:
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
Name — — — EWDI EX5 EX4 EX3 EX2
Bit Address EFH EEH EDH ECH EBH EAH E9H E8H
EWDI—Watchdog Interrupt Enable. 1 = Watchdog interrupt enabled.
EX5—External 5 Interrupt Enable. 1 = External 5 interrupt enabled.
EX4—External 4 Interrupt Enable. 1 = External 4 interrupt enabled.
EX3—External 3 Interrupt Enable. 1 = External 3 interrupt enabled.
EX2—External 2 Interrupt Enable. 1 = External 2 interrupt enabled.